WatchMount
The New WatchMount
We have designed a simple WatchMount, which is fixed to your kayak with double-sided adhesive tape or screws. The watch strap is easily pulled through the mount and locked with the buckle. Finish with the old watch holder with suction cups and a safety cord in the way. We have made some new updates to it, so the sides are now 0.5 mm thicker than before.
Strengths of our WatchMount
- You can fasten your watch in less than 5 seconds without it falling off!
- Designed for marathon rowers who do not have time to stop!
- Once put on, it does not fall off!
- 1 WatchMount
- 2 M4 x16 UH insex
- WatchMount Backside for 2 M4 nuts.
Tenical Information
Fits watch bands up to 28 mm in width
Watch out installation guide
If you don't have a Umbraco key you can buy one here: Umbraco key
Special Version:
A WatchMount with a +16 mm top. That means that even the heaviest
watches like the Fenix 5 will holds its position so you can follow along on the watch face
Two colors
We
do also make WatchMounts in two colors. This means that your text is much
more visible. This is especially good if you want to show your
kayak to others. When buying this, you shall add the Original Watchmount and the Different colored text.
We contact you about how your custom Watchmount should look.
Otherwise, you can write in the order description, how you want it to look
You can only add this product if you already have a WatchMount in your cart. Otherwise, we cannnot ad a colord text, if we have no WatchMount to put it on.
Design Ideas
Simple design with name and phone number
Only one line. With up to 15 charecters.
Two lines with name and club name. 15 characters per. line.
FAQ
No, You don't need the screws for the watchmount to be secured place. The screws are there to make sure the Watchmount stays on, even if you hit it extremely hard. But the adhesive will hold it in place perfectly.
Can I place the Watchmount on the top edge of a kayak?
ATM unfortunately not, We are working on a solution to the problem.
How long time does it take for the Watchmount to be safely glued to the Kayak?
When you place the Watchmount on a Kayak, the tape will start to set, DO NOT place it in water or move it for the first 4-6 Hours. The adhesive needs time to properly sink in place.
Don't pull, push, twist or in any other way move the Watchmount in the time period after placement. This can cause the adhesive to get destroyed.
Can I remove the Watchmount afterward?
Yes, you can, but it is a time-consuming process. We recommend using a hair dryer or a heat gun, to soften the adhesive. To do this, carefully heat up the surroundings of the WatchMount, and carefully slide a sharp hobby-knife blade under the WatchMount. Afterward, you will have spots of adhesive left on the top. You can remove this with rubbing alcohol and a dish cloth.
Can I get a WatchMount with a Logo?
You absolutely can. Contact us by mail: dimsr.dk@gmail.com and we will take it from there.
Can i use a non-rubber band on my watch for the WatchMount?
Unfortunately not. The WatchMount is designed in a way, so the rubber band holds the watch face in the correct position. A non-rubber band like metal would not hold the position. We are working on a solution to this.